Component Tests and General Diagnostics
Component InspectionSHIFT LOCK SOLENOID
^ Check operation by applying battery voltage to A/T device connector.
CAUTION: Be sure to apply the voltage of the correct polarity to the respective terminals. Otherwise, the part may be damaged.
DETENT SWITCH
For Key:
^ Check continuity between terminals of the A/T device connector.
KEY LOCK SOLENOID
Key Lock
^ Check operation by applying battery voltage to key switch and key lock solenoid connector.
CAUTION: Be careful not to cause burnout of the harness.
Key Unlock
^ Check operation by applying battery voltage to key switch and key lock solenoid connector.
CAUTION: Be careful not to cause burnout of the harness.
KEY SWITCH
^ Check continuity between terminals of the key switch and key lock solenoid connector.
STOP LAMP SWITCH
^ Check continuity between terminals of the stop lamp switch connector.
Check stop lamp switch after adjusting brake pedal. Refer to BR-6 "Inspection and Adjustment".