Ignition Timing: Testing and Inspection

Any of following two methods may be used.




Method A
1. Slide the harness protector off ignition coil No. 1 to clear the wires.
2. Attach timing light to the wires as shown in the figure.
3. Check ignition timing.

Method B




1. Remove No. 1 ignition coil.




2. Connect No. 1 ignition coil and No. 1 spark plug with suitable high-tension wire as shown, and attach timing light clamp to this wire.
3. Check ignition timing.

For procedures on how to adjust the timing, Adjustments