Rear Door Lock
BACK DOOR LOCKRemoval and Installation of Back Door Lock & Back Door Opener Actuator
1. Remove back door weatherstrip. Refer to "Removal and Installation of Back Door Weatherstrip".
2. Remove luggage finisher lower (center). Refer to Interior Trim.
3. Disconnect the connector and the clip of the back door opener.
4. Remove the mounting bolts.
5. Disconnect the connector of the back door opener actuator and back door opener cable remove the bracket.
6. Remove the mounting nuts remove back door lock and back door opener actuator.
Install in the reverse order of removal.
CAUTION:
- After installing, check operation.
- After installing, perform fitting adjustment. Refer to "Fitting Adjustment".