Seat Cushion: Service and Repair

SEAT CUSHION TRIM AND PAD
1. Remove the power seat switch knob (or recline knob on manual seat).
2. Remove the front seat cushion finisher (inner).
3. Remove the three power seat switch assembly screws (or lift knobs on manual seats).




4. Remove four bolts retaining the seat cushion assembly, remove seat cushion assembly.
5. Remove the retainer on the seat cushion frame, then remove the harness connector for the seat heater.
6. After removing the seat cushion trim and pad, remove the hog rings to separate the trim from the pad and seat cushion heater unit.