Seats: Service and Repair

REAR SEAT




Removal and Installation

REMOVAL
1. Pull the lock at the front bottom of the seat cushion forward (1 for each side), and pull the seat cushion upward to release the wire from the plastic hook, then pull the seat cushion forward to remove.
2. Remove the RH and LH screws on the seatback.
3. Slide the seatback upward to pull off the wire from the wire from the vehicle-side hook, and remove the seatback.
4. After removing, remove the hog ring to separate the trim and pad.

INSTALLATION
- Install in the reverse order of removal.

Dissasembly and Assembly:

Disassembly and Assembly