CAN Communication System Description

FOR TCS MODELS / System Diagram:

FOR TCS MODELS / Input/Output Signal Chart Part 1:

FOR TCS MODELS / Input/Output Signal Chart Part 2:

FOR TCS MODELS

FOR A/T MODELS / System Diagram:

FOR A/T MODELS / Input/Output Signal Chart Part 1:

FOR A/T MODELS / Input/Output Signal Chart Part 2:

FOR A/T MODELS

FOR M/T MODELS / System Diagram:

FOR M/T MODELS / Input/Output Signal Chart Part 1:

FOR M/T MODELS / Input/Output Signal Chart Part 2:

FOR M/T MODELS


Illumination

CAN Communication System Description
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability.

Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent).

In CAN communication, control units are connected with 2 communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.

Each control unit transmits/receives data but selectively reads required data only.