Fog/Driving Lamp: Service and Repair

FRONT FOG LAMP

Removal and Installation
The fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb.

CAUTION: Do not leave fog lamp assembly without bulb for a long period of time. Dust, moisture, smoke, etc. entering the fog lamp body may affect the performance. Remove the bulb from the headlamp assembly just before replacement bulb is installed.
Grasp only the plastic base when handling the bulb. Never touch the glass envelope. Touching the glass could significantly affect the bulb life and/or fog lamp performance.






1. Remove the fender protector.
2. Disconnect electrical connector.
3. Remove bolt, and slide fog lamp out of front fascia.


Install in the reverse order of removal.