Brake Light Switch: Testing and Inspection
STOP LAMP SWITCH1. Turn ignition switch "OFF".
2. Disconnect stop lamp switch harness connector.
3. Check continuity between stop lamp switch terminals 1 and 2 under the given conditions.
If NG, adjust stop lamp switch installation, refer to "BRAKE PEDAL", and perform step 3 again.
STOP LAMP SWITCH
1. Disconnect stop lamp switch harness connector.
2. Check continuity between stop lamp switch terminals 1 and 2 under the given conditions.
If NG, adjust brake pedal installation, refer to "BRAKE PEDAL", and perform step 2 again.