Connecting Rod Bolt Torque Sequence

- Tighten the connecting rod bolt as follows:
Apply engine oil to the threads and seats of the connecting rod bolts.

CAUTION: Always use either an angle wrench or protractor. Avoid tightening based on visual check alone.

Stage 1: 18.6 - 20.6 Nm (1.9 - 2.1 kg-m, 14 -15 ft. lbs.)
Stage 2: Rotate bolts 85° - 95° degrees (target 90° degrees)
^ Check the connecting rod side clearance.
^ After tightening the bolts, make sure that the crankshaft rotates smoothly.