Starter Motor: Service and Repair

REMOVAL
1. Disconnect the negative battery terminal.
2. Remove the air cleaner cover and the air cleaner to intake manifold collector duct (A/T models only).
3. Remove the harness protector from the starter engine room harness.
4. Disconnect the starter harness connectors.
5. Remove the two starter mounting bolts, using power tools.
6. Remove the starter.

Construction [M/T] 2.5L (QR25DE):

Construction [A/T] 2.5L (QR25DE):

Disassembly/Reassembly

Starter:

Installation
To install, reverse the removal procedure.