Steering Column: Service and Repair

STEERING COLUMN





Removal and installation

CAUTION:
^ The rotation of the spiral cable (SRS air bag component part) is limited. If the steering gear must be removed, set the front wheels in the straight-ahead direction. Do not rotate the steering column while the steering gear is removed.
^ Remove the steering wheel before disconnecting the coupling joint to avoid damaging the spiral cable.
^ When installing the steering column, finger-tighten all of the lower bracket and joint retaining bolts; then tighten them to specification. Do not apply undue stress to the steering column.





^ Align slit of the coupling joint with projection on dust cover. Insert the joint until surface A contacts surface B.
^ After installation, turn steering wheel to make sure it moves smoothly. Ensure the number of turns are the same from the straight-forward position to left and right locks. Be sure that the steering wheel is in a neutral position when driving straight ahead.





Disassembly and Assembly
^ Remove the tamper resistant self-shear type screws with a drill or other appropriate tool.





^ Install new tamper resistant self-shear type screws.