Intake Door Motor Circuit
Intake Door Motor CircuitSYMPTOM:
- Intake door does not change.
- Intake door motor does not operate normally.
Inspection Flow:
SYSTEM DESCRIPTION
Component Parts
Intake door control system components are:
- Auto amp.
- Intake door motor
- A/C LAN system (PBR built-in mode motor and air mix door motor)
- In-vehicle sensor
- Ambient sensor
- Sunload sensor
- Intake sensor
System Operation
The intake door control determines intake door position based on the ambient temperature, the intake air temperature and the in-vehicle temperature. When the ECON, DEFROST, or OFF switches are pushed, the auto amplifier sets the intake door at the Fresh position.
Intake Door Control Specification
COMPONENT DESCRIPTION
Intake door motor
The intake door motor is attached to the intake unit. It rotates so that air is drawn from inlets set by the auto amplifier. Motor rotation is conveyed to a lever which activates the intake door.
DIAGNOSTIC PROCEDURE
SYMPTOM: Intake door motor does not operate normally.
Perform diagnostic procedure for LAN system circuit. Refer to "LAN System Circuit".
INTAKE DOOR
1. Install intake door motor on intake unit and connect it to main harness.
2. Set up code No. in Self-diagnosis STEP 4. Refer to "Self-diagnosis".
3. Make sure intake door operates properly when changing from code No. 41 to 46 by pushing DEF switch.