Dashboard / Instrument Panel: Service and Repair

INSTRUMENT PANEL ASSEMBLY







REMOVAL AND INSTALLATION

Work Steps:

Work Steps

Cluster Lid C
Pull lid toward rear of vehicle.




- Disconnect electrical connectors.

Installation is in the reverse order of removal.

Cluster Lid D
1. Remove cluster lid C.




2. Remove cluster lid D.
- Remove screw using power tool.
- Pull lid toward rear of vehicle to release clips.

Installation is in the reverse order of removal.

Driver Lower Instrument Panel
1. Remove cluster lid C.




2. Remove fuse box cover.
3. Remove screws using power tool, and lower instrument cover.




- Pull to disconnect clips.

Installation is in the reverse order of removal.

Cluster Lid A
1. Remove driver lower instrument panel.
2. Pull toward rear of vehicle to release clips.




- Disconnect indicator lamp sockets.

Installation is in the reverse order of removal.

Combination Meter
1. Remove cluster lid A.




2. Remove screws using power tool.
- Pull cluster lid A from opening.
- Disconnect electrical connectors.
- Remove combination meter.

Installation is in the reverse order of removal.

A/T Finisher




Pull up to release clips and remove A/T finisher.

Installation is in the reverse order of removal.

M/T Finisher




1. Remove shifter knob.
2. Pull up to release clips and remove M/T finisher.

Installation is in the reverse order of removal.

Cup Holder




1. Open storage bin B.
2. Remove console finisher.
3. Remove screw cover and remove screw using power tool.
- Pull up to release clips on cup holder and remove cup holder.

Installation is in the reverse order of removal.

Glove Box




1. Remove screws from glove box striker and glove box using power tool.
2. Pull glove box towards rear of car to release clips.
3. Disconnect lamp socket, and remove glove box.

Installation is in the reverse order of removal.