CAN System (For TCS Models)

FOR TCS MODELS / System Diagram:

FOR TCS MODELS / Input/Output Signal Chart:

FOR A/T MODELS / System Diagram:

FOR A/T MODELS / Input/Output Signal Chart:

FOR M/T MODELS / System Diagram:

FOR M/T MODELS / Input/Output Signal Chart:

CAN COMMUNICATION - System Description
CAN (Controller Area Network) is a serial communication line for real time application.

It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability.

Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent).

In CAN communication, control units are connected with 2 communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads required data only.