Differential, Automatic Transaxle

Final Drive
DIFFERENTIAL SIDE GEAR CLEARANCE
Clearance between side gear and differential case with washer mm (inch) 0.1 - 0.2 (0.004 - 0.008)

DIFFERENTIAL SIDE GEAR THRUST WASHERS
Thickness Part numbers
0.75 mm (0.0295 in.) 38424-81X00
0.80 mm (0.0315 in.) 38424-81X01
0.85 mm (0.0335 in.) 38424-81X02
0.90 mm (0.0354 in.) 38424-81X03
0.95 mm (0.0374 in.) 38424-81X04
*: Always check with the Parts Department for the latest parts information.

DIFFERENTIAL SIDE BEARING PRELOAD ADJUSTING SHIMS
Thickness Part numbers
0.48 mm (0.0189 in.) 31438-80XOO
0.52 mm (0.0205 in.) 31438-80X01
0.56 mm (0.0220 in.) 31438-80X02
0.60 mm (0.0236 in.) 31438-80X03
0.64 mm (0.0252 in.) 31438-80X04
0.68 mm (0.0268 in.) 31438-80X05
0.72 mm (0.0283 in.) 31438-80X06
0.76 mm (0.0299 in.) 31438-80X07
0.80 mm (0.0315 in.) 31438-80X08
0.84 mm (0.0331 in.) 31438-80XO9
0.88 mm (0.0346 in.) 31438-80X10
0.92 mm (0.0362 in.) 31438-80X11
*: Always check with the Parts Department for the latest parts information.

BEARING PRELOAD
Differential side bearing preload 0.05-0.09 mm (0.0020 - 0.0035 in.)

TURNING TORQUE
Turning torque of final drive assembly 0.78 - 1.37 Nm (8.0 - 14.0 kg-cm, 6.9 - 12.2 inch lbs)