Output Shaft, A/T

Output Shaft
SEAL RING CLEARANCE
Output shaft seal ring clearance
Standard 0.10 - 0.25 mm (0.0039 - 0.0098 inch)
Allowable limit 0.25 mm (0.0098 inch)





SEAL RING

END PLAY
Output shaft end play 0 - 0.15 mm (0 - 0.0059 inch)

OUTPUT SHAFT ADJUSTING SHIMS
Thickness Part numbers
0.80 mm (0.0315 in.) 31438-80X60
0.84 mm (0.0331 in.) 31438-80X61
0.88 mm (0.0346 in.) 31438-80X62
0.92 mm (0.0362 in.) 31438-80X63
0.96 mm (0.0378 in.) 31438-80X64
1.00 mm (0.0394 in.) 31438-80X65
1.04 mm (0.0409 in.) 31438-80X66
1.08 mm (0.0425 in.) 31438-80X67
1.12 mm (0.0441 in.) 31438-80X68
1.16 mm (0.0457 in.) 31438-80X69
1.20 mm (0.0472 in.) 31438-80X70
*: Always check with the Parts Department for the latest parts information.