Camshaft Bearing

Tightening Sequence




- Before installing camshaft brackets, apply sealant to mating surface of No. 1 camshaft bracket.
^ Use Genuine Silicone RTV Sealant or equivalent.





^ Before installation, wipe off any protruding sealant.





^ Install camshaft brackets in their original positions and direction. Align the stamp marks as shown.
^ If checking and adjusting any part of valve assembly or camshaft, check valve clearance according to the reference data.
Valve clearance (cold) Intake: 0.26 - 0.34 mm (0.010 - 0.013 inch)
Valve clearance (cold) Exhaust: 0.29 - 0.37 mm (0.011 - 0.015 inch)











^ Tighten the camshaft brackets in the four steps, in numerical order as shown.