Rear

Precautions





^ When installing each rubber part, final tightening must be carried out under unladen condition* with tires on ground. Oil will shorten the life of rubber bushings. Be sure to wipe off any spilled oil.
*: Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.
^ Use flare nut wrench when removing or installing brake tubes.
^ After installing removed suspension parts, check wheel alignment.
^ Do not jack up at the trailing arm and lateral link.
^ Always torque brake lines when installing
^ Lock nuts are unreusable parts; always use new ones.
When replacing, do not wipe the oil off of the new lock nut before tightening.