On-Vehicle Inspection

Components

On-vehicle Service
FRONT SUSPENSION PARTS
Check front axle and front suspension parts for excessive play, cracks, wear or other damage.





^ Shake each front wheel to check for excessive play.
^ Make sure that cotter pin is inserted.
^ Retighten all axle and suspension nuts and bolts to the specified torque.





^ Check strut (shock absorber) for oil leakage or other damage.
^ Check suspension ball joint for grease leakage and ball joint dust cover for cracks or other damage. If ball joint dust cover is cracked or damaged, replace transverse link.





^ Check spring height from top of wheel arch to the ground.
- Vehicle must be unladen*, parked on a level surface, and tires checked for proper inflation and wear (tread wear indicator must not be showing).
*: Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.
- Bounce vehicle up and down several times before measuring.
Standard height: Refer to Specifications.
- Spring height is not adjustable. If out of specification, check for worn springs or suspension parts.