Component Inspection
InspectionSHOCK ABSORBER ASSEMBLY
^ Check for smooth operation through a full stroke, both compression and extension.
^ Check for oil leakage on welded or gland packing portions.
^ Check piston rod for cracks, deformation or other damage and replace if necessary.
SUSPENSION ARM
^ Check suspension arm for damage, cracks, deformation and replace if necessary.
^ Check rubber bushing for damage, cracks and deformation. Replace suspension arm assembly if necessary.
^ Check ball joint. Replace suspension arm assembly if any of the following exists:
a. Ball stud is worn.
b. Joint is hard to swing.
c. Play in axial direction is excessive.
Before checking, turn ball joint at least 10 revolutions so that ball joint is properly broken in.
Swinging force: Refer to Specifications.
Turning force: Refer to Specifications.
Vertical end play: Refer to Specifications.
FRONT LOWER LINK
^ Check front lower link for any deformation, cracks, or damage and replace if necessary.
UPPER RUBBER SEAT AND BUSHING
^ Check rubber parts for deterioration, or cracks and replace if necessary.
REAR LOWER LINK AND COIL SPRING
^ Check for deformation, cracks, or other damage and replace if necessary.
STABILIZER BAR
^ Check stabilizer bar for any deformation, cracks, or damage and replace if necessary.
^ Check rubber bushings for deterioration, or cracks and replace if necessary.