Body - Grease Streaks on Front Door Glass

Classification:
BT03-048

Reference:
NTB03-111

Date:
November 25, 2003

2002-2004 ALTIMA; GREASE STREAK ON LEFT OR RIGHT FRONT DOOR WINDOW(S)

APPLIED VEHICLE:
2002-2004 Altima (L31)

APPLIED DATE:
Vehicles built before October 27, 2003

APPLIED VIN:
Vehicles built before 1N4AL11D*4C146000

IF YOU CONFIRM:
Grease streak on

^ Left or Right Front door window

ACTION:





Clean excessive grease from window regulator rails and affected areas (see Figure 1).

IMPORTANT:
The purpose of ACTIONS (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service Procedure as it contains information that is essential to successfully completing this repair.





CLAIMS INFORMATION

Submit a Primary Failed Part (PP) line claim using the claims coding shown.

SERVICE PROCEDURE

1. Remove the door finisher panel.

Refer to Section "EI", "DOOR PANEL Removal and Installation" in the applicable Service Manual.

2. Remove the affected window.

Refer to Section "GW", "FRONT DOOR GLASS AND REGULATOR Removal and Installation" in the applicable Service Manual.

3. Remove the inner door module assy. (black panel).

Refer to Section "GW", "FRONT DOOR GLASS AND REGULATOR Removal and Installation".

NOTE:
It is not necessary to remove the regulator from the inner door module assy.

4. Use a mild detergent or similar cleaning product to clean the following areas:

a. Waist molding (felt strip) on top inside edge of door finisher.

b. Black rubber bumpstop on top of forward regulator rail*.

c. Excess grease on regulator rails*.

d. Window surface.

*See Figure 1.

5. Re-assemble the door.