Power Locks: Description and Operation

System Description

OPERATION
- The lock/unlock switches (LH and RH) on door trim can lock and unlock all doors.
- With the door key inserted in the key cylinder on front LH, turning it to LOCK, will lock all doors; turning it to UNLOCK once unlocks the corresponding door; turning it to "UNLOCK" again within 5 seconds after the first unlock operation unlocks all of the other doors. (Signals from door key cylinder switch). Select unlock mode can be changed by CONSULT-II.
- If the ignition key is in the ignition key cylinder and one or more of the doors are open, setting the lock/ unlock switch to LOCK locks the doors once but then immediately unlocks them. Key reminder door mode can be changed by CONSULT-II. Scan Tool Testing and Procedures