Work Flow

WORK FLOW
1. Print all the data of SELF-DIAG RESULTS and DATA MONITOR for ENGINE and A/T displayed on CONSULT-II. Refer to DTC U1000, U1001 CAN COMMUNICATION LINE (EC-161) for "ENGINE" and "DTC U1000 CAN COMMUNICATION LINE" for "A/T".
2. Attach the printed sheet of SELF-DIAG RESULTS and DATA MONITOR onto the check sheet. Refer to "CHECK SHEET".
3. Based on the data monitor results, put "v" marks onto the items with "UNKWN" or "NG" in the check sheet table. Refer to "CHECK SHEET.

NOTE: If "NG" is displayed on "CAN COMM" for the diagnosed control unit, replace the control unit.

4. According to the check sheet results (example), start inspection. Refer to "CHECK SHEET RESULTS (EXAMPLE)".