With Manufacturer Scan Tool (CONSULT-II)

With CONSULT-II
- SELF-DIAG [CURRENT]
A current Self-diagnosis result is displayed on the CONSULT-II screen in real time.

After the malfunction is repaired completely, no malfunction is detected on SELF-DIAG [CURRENT].

- SELF-DIAG [PAST] Return to the SELF-DIAG [CURRENT] CONSULT-II screen by pushing BACK key of CONSULT-II and select SELF-DIAG [CURRENT] in SELECT DIAG MODE. Touch ERASE in SELF-DIAG [CURRENT] mode.






NOTE: If the memory of the malfunction in SELF-DIAG [PAST] is not erased, the User mode shows the system malfunction by the operation of the warning lamp even if the malfunction is repaired completely.

- "TROUBLE DIAG RECORD"
The memory of "TROUBLE DIAG RECORD" cannot be erased.