Camshaft Bearing

Camshaft and Camshaft Bearing

Installation Sequence




- Before installing camshaft brackets, apply sealant to mating surface of No. 1 camshaft bracket.
^ Use Genuine RTV silicone sealant or equivalent.
^ Install camshaft brackets in their original positions. Align stamp mark as shown in the figure. If any part of valve assembly or camshaft is replaced, check valve clearance according to reference data. After completing assembly check valve clearance.





Reference data valve clearance (Cold):
Intake 0.26- 0.34 mm (0.010 - 0.013 inch)
Exhaust 0.29 - 0.37 mm (0.011 - 0.015 inch)
^ Lubricate threads and seat surfaces of camshaft bracket bolts with new engine oil before installing them.