Odometer: Description and Operation

HOW TO CHANGE THE DISPLAY FOR ODO/TRIP METER:

HOW TO CHANGE THE DISPLAY FOR ODO/TRIP METER




NOTE: Turn ignition switch to the ON position to operate odo/trip meter.

POWER SUPPLY AND GROUND CIRCUIT
Power is supplied at all times:
- through 10 A fuse [No. 12, located in the fuse block (J/B)]
- to combination meter terminal 25 (without tachometer) or 42 (with tachometer).

With the ignition switch in the ON or START position, power is supplied:
- through 10 A fuse [No. 30, located in the fuse block (J/B)]
- to combination meter terminal 26 (without tachometer) or 41 (with tachometer).

Ground is supplied:
- to combination meter terminal 27 (without tachometer) or 48 (with tachometer)
- through body grounds M28 and M54.