Oil Pressure

OIL PRESSURE CHECK







WARNING: Be careful not to burn yourself, as the engine oil may be hot.
For M/T models, put gearshift lever in Neutral. For A/T models, put the selector lever in Park "P".position.


1. Check the oil level.
2. Remove the oil pressure switch.
3. Connect the oil pressure gauge using the Tool.
4. After warming up the engine to the normal operating temperature, check that oil pressure corresponding to the engine speed is produced.

Engine oil pressure [Oil temperature is 80°C (176°F)]

5. After checking, install the oil pressure switch as follows.
a. Remove old sealant adhering to the switch and engine.
b. Apply thread sealant. Tighten switch to specification. Use Genuine High Performance Thread Sealant or equivalent.

Oil Pressure - 1.8L (QG18DE):

Oil pressure switch:.................12 - 17 Nm (1.22 - 1.73 kg-m, 8.8 - 12.5 ft. lbs.)