Pinout Values and Diagnostic Parameters

ECM Harness Connector Terminal Layout:

ECM Harness Connector Terminal Layout

ECM Terminals and Reference Value

PREPARATION




1. ECM is located in the right side of the cowl top (behind the strut tower).
For this inspection:
2. Remove ECM harness protector.




3. When disconnecting ECM harness connector, loosen it with levers as far as they will go as show at right.
4. Connect a bread-out box (SST) and Y-cable adapter (SST) between the ECM and ECM harness connector.
- Use extreme care not to touch 2 pins at one time.
- Data is for comparison and may not be exact.

ECM Harness Connector Terminal Layout Part 1:

ECM Harness Connector Terminal Layout Part 2:

ECM Harness Connector Terminal Layout Part 3:

ECM Harness Connector Terminal Layout Part 4:

ECM Harness Connector Terminal Layout Part 5:

ECM Harness Connector Terminal Layout Part 6:

ECM Harness Connector Terminal Layout Part 7:

ECM Harness Connector Terminal Layout Part 8:

ECM Inspection Table