Removal and Installation

Radiator, Radiator Hoses, Cooling Fan Assembly - 2.5L (QG25DE):

WARNING: Never remove the radiator cap when the engine is hot. Serious burns could occur from high pressure coolant escaping from the radiator. Wrap a thick cloth around the cap. Slowly push down and turn it a quarter turn to allow built-up pressure to escape. Carefully remove the cap by pushing down and turning it three-quarters around.

REMOVAL
1. Drain the engine coolant.
2. Remove the air duct with air cleaner assembly.
3. Disconnect A/T oil cooler hoses (if equipped).
Install a blind plug to avoid leakage of A/T oil.

4. Disconnect the radiator upper hose, lower hose, and mounting bracket.
5. Remove the radiator and cooling fan assembly

CAUTION: Do not damage or scratch radiator core when removing.

INSTALLATION
Installation is in the reverse order of removal.

After installation, run the engine until it reaches full operating temperature and check for any cooling system leaks. Repair any leaks as necessary.