CONSULT-II Inspection Procedure (BCM)

CONSULT-II Inspection Procedure for BCM

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.

"MULTI REMOTE ENT"
1. Turn ignition switch "OFF".




2. Connect "CONSULT-II" and "CONSULT-II CONVERTER" to the data link connector.
3. Turn ignition switch "ON".




4. Touch "START(NISSAN BASED VHCL)".




5. Touch "BCM".




6. Touch "MULTI REMOTE ENT".




7. Select diagnosis mode. "WORK SUPPORT", "DATA MONITOR", "ACTIVE TEST" are available.