CONSULT-II Basic Operation Procedure (IPDM E/R)

CONSULT-II Function of IPDM E/R

BASIC OPERATION PROCEDURE

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.

1. Turn ignition switch "OFF".




2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector.




3. Turn ignition switch "ON".
4. Touch "START(NISSAN BASED VHCL)".




5. Touch "IPDM".




6. Select diagnosis mode. "DATE MONITOR" and "ACTIVE TEST" are available.