CONSULT-II Inspection Procedure (BCM)

CONSULT-II Function of BCM

CONSULT-II BASIC OPERATION PROCEDURE

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.

1. Turn ignition switch "OFF".




2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector.




3. Turn ignition switch "ON".
4. Touch "START(NISSAN BASED VHCL)".




5. Touch "BCM".




6. Touch "THEFT ALM".




7. Select diagnosis mode. "WORK SUPPORT", "DATA MONITOR", "ACTIVE TEST" are available.