Front Bumper: Service and Repair

Exploded View EI-15 (Part 1):

Exploded View EI-15 (Part 2):

FRONT BUMPER

Removal and Installation

CAUTION: Bumper fascia is made of resin. Do not apply strong force to it, and be careful to prevent contact with oil.

REMOVAL
1. Remove clips of bumper fascia upper portion.
2. Remove screw of bumper fascia lower portion.
3. Remove screws of bumper fascia both side.
4. Remove screws and bolts of both right/left fender protectors on front side.
5. Pull out both right/left of bumper fascia and remove bumper fascia assembly.
6. Remove energy absorber.
7. Remove bolts and nuts of bumper reinforcement and remove bumper fascia with air guide.
8. Remove bolts of bumper stay and remove bumper stay.

REMOVAL of Bumper Side Reflector (Left Side)
1. Remove bumper assembly.
2. Remove screw of bumper side reflector.

REMOVAL of Bumper Side Reflector (Right Side)
1. Remove bumper assembly.
2. Remove screw of bumper side reflector.

INSTALLATION
Install in the reverse order of removal.