Timing Components: Specifications
TIMING CHAINTIMING CHAIN:
TIMING CHAIN:
Bolt length: Bolt position
20 mm (0.79 inch) : 1, 2, 3, 6, 7, 8, 9, 10
16 mm (0.63 inch) : Except the above
8 mm (0.31 inch) dia. bolts : 1, 2
25.5 - 31.3 Nm (2.6 - 3.2 kgf-cm, 19 - 23 ft. lbs.)
6 mm (0.24 inch) dia. bolts : Except the above
11.7 -13.7 Nm (1.2 -1.4 kgf-cm, 9 -10 ft. lbs.)
Surface height difference between the following parts on the oil pan mounting surface.
Standard
Front timing chain case to rear timing chain case:.................-0.14 to 0.14 mm (-0.005 to 0.0055 inch)
Crankshaft pulley bolt........................39.2 to 49.0 Nm (4.0 to 5.0 kgf-cm, 29 to 36 ft. lbs.).