Backup Light Bulb: Service and Repair
Bulb ReplacementREAR FENDER SIDE (STOP & TAIL LAMP BULB, REAR SIDE MARKER LAMP BULB)
1. Remove rear combination lamp.
2. Turn bulb socket counterclockwise and unlock it.
3. Remove bulb.
4. Install in the reverse order of removal.
Stop/tail lamp (rear fender side) : 12 V - 21/5 W
Rear side marker lamp (rear fender side) : 12 V - 5 W
REAR BUMPER SIDE (BACK-UP LAMP BULB, REAR TURN SIGNAL LAMP BULB)
1. Remove rear combination lamp.
2. Turn bulb socket counterclockwise and unlock it through the bumper fascia crevice.
3. Remove bulb.
4. Install in the reverse order of removal.
Rear turn signal lamp (rear bumper side) : 12 V - 21 W (umber bulb)
Back-up lamp (rear bumper side) : 12 V - 21 W