Brake Light Switch: Testing and Inspection

Component Inspection

STOP LAMP SWITCH (FOR A/T MODELS)
1. Turn ignition switch OFF.
2. Disconnect stop lamp switch harness connector.







3. Check harness continuity between stop lamp switch terminals 1 and 2 under the given conditions.
If NG, adjust stop lamp switch installation, refer to "BRAKE PEDAL", and perform step 3 again.

STOP LAMP SWITCH (FOR M/T MODELS)
1. Turn ignition switch OFF.
2. Disconnect stop lamp switch harness connector.







3. Check harness continuity between stop lamp switch terminals 1 and 2 under the given conditions.
If NG, adjust stop lamp switch installation, refer to "BRAKE PEDAL", and perform step 3 again.

STOP LAMP SWITCH




1. Disconnect stop lamp switch harness connector.










2. Check continuity between stop lamp switch terminals 1 and 2 under the given conditions.
3. If NG, adjust stop lamp switch installation, refer to "BRAKE PEDAL", and perform step 2 again.