Center Mounted Brake Lamp: Service and Repair

High-Mounted Stop Lamp (Coupe models)

BULB REPLACEMENT, REMOVAL AND INSTALLATION




1. Remove back door finisher upper.
2. Disconnect high-mounted stop lamp connector.
3. Remove Nuts and remove high-mounted stop lamp with cover from back door. Be sure to pull toward the arrow in the figure.
4. Remove screws and remove high-mounted stop lamp assembly from cover.
5. Install in the reverse order of removal.

High-mounted stop lamp : LED

High-Mounted Stop Lamp (Roadster models)

BULB REPLACEMENT, REMOVAL AND INSTALLATION




1. Turn ignition switch ON, and turn soft-top OPEN/CLOSE switch ON.
2. When the storage lid is fully opened, soft-top OPEN/CLOSE switch to OFF.
3. Remove battery negative cable.
4. Disconnect high-mounted stop lamp connector.
5. Remove high-mounted stop lamp. Be sure to pull toward the arrow in the figure.
6. Remove high-mounted stop lamp assembly from storage lid.
7. Install in the reverse order of removal.

High-mounted stop lamp : LED