Tail Lamp: Service and Repair

Removal and Installation

REMOVAL

Rear Fender Side




1. Remove plugs and remove rear combination lamp mounting bolts.
2. Pull the rear combination lamp toward side of the vehicle and remove from the vehicle.
3. Disconnect rear combination lamp connector.

Rear Bumper Side




1. Remove rear bumper fascia.
2. Disconnect rear combination lamp connector.
3. Remove rear combination lamp mounting screws.
4. Remove rear combination lamp from rear bumper fascia.

INSTALLATION
Install in the reverse order of removal. Be careful of the following:

Rear combination lamp mounting bolt:(Rear fender side)
Torque: 5.2 N.m (0.53 kg-m, 45 in-lb)

Rear combination lamp mounting screw:(Rear bumper side)
Torque: 3.1 N.m (0.32 kg-m, 27 in-lb)