Air Cleaner Housing: Service and Repair

AIR CLEANER AND AIR DUCT

AIR CLEANER AND AIR DUCT:

REMOVAL


1. Remove clips, and slide air duct (inlet) frontward, disengage clips and air cleaner case.

NOTE: When removing air duct (inlet), remove front bumper and bumper stay (LH).

2. Disconnect the harness connector from the mass air flow sensor.
3. Remove air cleaner case/mass air flow sensor assembly and air duct assembly disconnecting their joints.
Add marks as necessary for easier installation.

4. Remove mass air flow sensor from air cleaner case.

CAUTION: Handle mass air flow sensor with care.
Do not shock it.
Do not disassemble it.
Do not touch its sensor.

INSTALLATION
Install in the reverse order of removal paying attention to the follow

Align marks. Attach each joint. Screw clamps firmly.







Position mass air flow sensor as shown in the figure.