Coolant Line/Hose: Service and Repair

WATER OUTLET AND WATER PIPING

WATER OUTLET AND WATER PIPING:

REMOVAL
1. Remove undercover using power tools.
2. Drain coolant from drain plugs on radiator and both sides of cylinder block.
3. Remove engine cover.
4. Remove air duct and air cleaner case assembly.
5. Remove radiator upper hose and heater hose.

INSTALLATION
1. Install in the reverse order of removal.
2. Securely insert each hose, and install a clamp at a position where it does not interfere with the pipe bulge.
3. When inserting a water pipe into water outlet, apply neutral detergent to O-ring.