7: CAN Communication Line

Inspection 7: CAN Communication Line
DIAGNOSTIC PROCEDURE
1. SELF-DIAGNOSTIC RESULT CHECK
With CONSULT-II

1. Select "AIR PRESSURE MONITOR" on "SELECT SYSTEM" screen.
2. Select "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
3. Check display content in self-diagnostic results.





Contents displayed?
No malfunction >> INSPECTION END.
Malfunction in CAN communication system >> GO TO 2.

2. SYMPTOM CHECK
With CONSULT-II
^ Select "CAN DIAG SUPPORT MNTR" in "DATA MONITOR".
^ Select "START" and check display content.





>> After printing the monitor items, go to "CAN System".