Programming and Relearning

CONSULT-II




CONSULT-II performs the given functions with combination of data receiving, command and transmission using the communication line from the BCM.

CONSULT-II INSPECTION PROCEDURE

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.




1. With the ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to the data link connector, then turn the ignition switch ON.




2. Touch "START(NISSAN BASED VHCL)"




3. Touch "BCM" on "SELECT SYSTEM" screen.




4. Select the desired part to be diagnosed on the "SELECT TEST ITEM" screen.




ITEMS OF EACH PART

NOTE: This item is displayed, but cannot test it.