Cannot Be Changed to Manual Mode

Cannot Be changed to Manual Mode

SYMPTOM: Does not change to manual mode when manual shift gate is used.

DIAGNOSTIC PROCEDURE
1. MANUAL MODE SWITCH
Check the manual mode switch. Refer to "DTC P1815 MANUAL MODE SWITCH".
OK or NG
OK >>GO TO 2.
NG >>Repair or replace damaged parts.

2. CHECK SELF-DIAGNOSIS RESULTS
Perform self-diagnosis. Refer to "SELF-DIAGNOSTIC PROCEDURE (WITH CONSULT-II)".
Do the self-diagnosis results indicate turbine revolution sensor?
YES >>Check the malfunctioning system. Refer to "DTC P1716 TURBINE REVOLUTION SENSOR".
NO >>INSPECTION END