Engine Cannot Be Started In "P" or "N" Position
Engine Cannot Be Started In "P" or "N" PositionSYMPTOM:
^ Engine cannot be started with selector lever in "P" or "N" position.
^ Engine can be started with selector lever in "D" or "R" position.
DIAGNOSTIC PROCEDURE
1. CHECK SELF-DIAGNOSIS RESULTS
Perform self-diagnosis. Refer to "SELF-DIAGNOSTIC PROCEDURE (WITH CONSULT-II)", "TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS)".
Do the self-diagnosis results indicate PNP switch?
YES >>Check the malfunctioning system. Refer to "DTC P0705 PARK/NEUTRAL POSITION SWITCH".
NO >>GO TO 2.
2. CHECK CONTROL LINKAGE
Check the control linkage.
OK or NG
OK >>GO TO 3.
NG >>Adjust control linkage.
3. CHECK STARTING SYSTEM
Check the starting system.
OK or NG
OK >>INSPECTION END
NG >>Repair or replace damaged parts.