Convertible Top Switch: Service and Repair

SOFT TOP

Removal and Installation of Switches

REMOVAL
1. Uninstall soft top assembly form the vehicle. Remove left side soft top operation motor unit from the soft top.
2. Remove harness tie wrap band at the left side of the soft top.




3. Remove limit switches with plate rail RR bracket by removing bolt.




4. Remove limit switches with soft top switch bracket1 by removing bolt.




5. Remove limit switches with soft top switch bracket2 by removing bolt.

INSTALLATION
Install in the reverse order of removal.

NOTE: Wire harnesses correctly to avoid following situation.

- Pinching harnesses by frame
- Tangling harnesses by frame and links
- Pulling harnesses between fixing point by harness crips.