Torque Specifications

CYLINDER BLOCK:

CYLINDER BLOCK:

CYLINDER BLOCK (FOR CANADA):

Main Bearing Cap Bolts:

Main Bearings:

Water Pump:

WATER PUMP
Water Pump 8.4 -10.8 Nm (0.9 - 1.1 kgf-cm, 75 - 95 inch lbs.)
Water Pmp cover 9.8 - 12.8 Nm (1.0 - 1.3 kgf-cm, 87 - 113 inch lbs.)

EXHAUST MANIFOLD AND THREE WAY CATALYST:

EXHAUST MANIFOLD
Exhaust manifold cover 5.1 - 6.5 Nm (0.52 - 0.66 kgf-cm, 46 - 57 inch lbs.)
Exhaust manifold stud 12.7 - 16.7 Nm (1.3 - 1.7 kgf-cm, 10 - 12 ft. lbs.)










Exhaust manifold 28.5 - 32.4 Nm (2.9 - 3.3 kgf-cm, 21 - 23 ft. lbs.)

INTAKE MANIFOLD COLLECTOR:

INTAKE MANIFOLD:

INTAKE MANIFOLD COLLECTOR AND INTAKE MANIFOLD
Intake manifold collector (upper) 11.8 - 13.7 Nm (1.2 - 1.3 kgf-cm, 9 - 10 ft. lbs.)







Intake manifold collector (lower) 11.8 - 13.7 Nm (1.2 - 1.3 kgf-cm, 9 - 10 ft. lbs.)

BOLT TORQUE SEQUENCE:

Intake manifold
1) 4.9 - 9.8 Nm (0.50 - 1.0 kgf-cm, 4 - 7 ft. lbs.)
2) 26.5 - 31.4 Nm (2.7 - 3.2 kgf-cm, 20 - 23 ft. lbs.)
3) 26.5 - 31.4 Nm (2.7 - 3.2 kgf-cm, 20 - 23 ft. lbs)










TIMING CHAIN

TIMING CHAIN:

TIMING CHAIN:

Bolt length: Bolt position
20 mm (0.79 inch) : 1, 2, 3, 6, 7, 8, 9, 10
16 mm (0.63 inch) : Except the above








8 mm (0.31 inch) dia. bolts : 1, 2
25.5 - 31.3 Nm (2.6 - 3.2 kgf-cm, 19 - 23 ft. lbs.)
6 mm (0.24 inch) dia. bolts : Except the above
11.7 -13.7 Nm (1.2 -1.4 kgf-cm, 9 -10 ft. lbs.)


Surface height difference between the following parts on the oil pan mounting surface.

Standard
Front timing chain case to rear timing chain case:.................-0.14 to 0.14 mm (-0.005 to 0.0055 inch)


Crankshaft pulley bolt........................39.2 to 49.0 Nm (4.0 to 5.0 kgf-cm, 29 to 36 ft. lbs.).