Removal And Installation

REMOVAL
1. Open the driver and front passenger window, and then disconnect the battery negative cable.

CAUTION: After the battery cables are disconnected, do not open/close the driver and/or front passenger door with the window in the full up position. The automatic window adjusting function will not work and the side roof panel may be damaged.

2. Remove engine undercover, using power tools.
3. Remove radiator fan assembly.
4. Remove alternator and power steering belt.
5. Remove oil pressure harness clip from alternator stay.




6. Disconnect oil pressure switch connector.
7. Remove alternator stay mounting bolts and alternator stay, using power tools.
8. Remove alternator mounting bolt, using power tools.




9. Disconnect alternator connector.
10. Remove B terminal mounting nut.
11. Remove harness clip and water hose bracket from alternator.
12. Remove alternator assembly to the direction under side the vehicle.

INSTALLATION
Install in the reverse order of removal, taking care of the following point.
- Install alternator, and check tension of belt.

CAUTION: Be sure to tighten B terminal mounting nut carefully.