Replacement Fluid
ReplacementDRAINING
1. Start the engine and warm up the transmission unit sufficiently.
2. Stop the engine, remove filler plug and drain plug and then drain fluid.
3. Set a new gasket on drain plug and install it to the transmission.
Drain plug: 30 - 39 Nm (3.1 - 3.9 kg-m, 23 - 28 ft. lbs.)
CAUTION: Gaskets are not reusable. Never reuse them.
FILLING
1. Remove filler plug. Fill new oil into the transmission to the level of the filler plug mounting hole.
Oil grade: API GL-4
Oil capacity: Approximately 2.9 liters (3-1/4 US quarts 2-3/4 Imp quarts)
2. After filling, check fluid level, Set a new gasket on filler plug and install it to the transmission.
Filler plug: 30 - 39 Nm (3.1 - 3.9 kg-m, 23 - 28 ft. lbs.)
CAUTION: Gaskets are not reusable. Never reuse them.