Work Flow

Work Flow

1. Print all the data of "SELF-DIAG RESULTS" and "DATA MONITOR" for "ENGINE", "A/T" and "BCM" displayed on CONSULT-II.
- Refer to EC-112 (QR25DE engine models), EC-714 (VQ35DE engine models) for "ENGINE". Self-Diag Results Mode

- Refer to AT-40 for "A/T". Testing and Inspection

- Refer to BCS-14 for "BCM". Body Control Module

2. Attach the printed sheet of "SELF-DIAG RESULTS" and "DATA MONITOR" onto the check sheet. Refer to "CHECK SHEET".
3. Based on the data monitor results, put check marks onto the items with "UNKWN" or "NG" in the check sheet table. Refer to "CHECK SHEET".

NOTE: If "NG" is displayed on "CAN COMM" for the diagnosed control unit, replace the control unit.

4. According to the check sheet results (example), start inspection. Refer to "CHECK SHEET RESULTS (EXAMPLE)".