Power Distribution Module: Service and Repair

IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)

Removal and Installation of IPDM E/R

REMOVAL
1. Disconnect the negative battery cable.




2. Remove 2 bolts and position coolant reservoir aside.
3. Remove IPDM E/R upper cover.




4. Remove IPDM E/R harness cover.




5. Release 2 clips and pull IPDM E/R up from case.
6. Disconnect IPDM E/R connectors and then remove the IPDM E/R.

INSTALLATION
1. Install in the reverse order of removal.